Using Analog Audio - Insignia NS-24E40SNA14 User Manual

Insignia 24" LED TV

Using analog audio

When you connect a home theater system or sound bar to the
On your TV
3.5mm audio
cable connector
/AUDIO OUT
jack
To connect a home theater system or sound bar using analog audio:
1 Make sure that your TV's AC power adapter is unplugged and the home theater system or sound bar is turned
off.
2 Connect a 3.5mm audio cable (not provided) to the
AUDIO IN jacks on the analog home theater system or sound bar.
3 Plug your TV's AC power adapter into a power outlet, then turn on your TV.
4 Turn on the home theater system or sound bar, then set it to the correct source mode. For more information, see
the documentation that came with the home theater system or sound bar.
Notes
• For information about selecting the audio out mode for a home theater
• If you want to use headphones, you need to disconnect the amplifier,
3.5mm audio
Home theater system
or sound bar, see the Headphone/Audio Out option in
sound settings" on page 43.
home theater system, or sound bar.
www.insigniaproducts.com
/AUDIO OUT jack, the TV speakers are muted.
Side of TV
cable
/AUDIO OUT jack on the side of your TV and to the
"Adjusting
31