Update Gogear; Manually Verify / Update Firmware - Philips GoGear SA1VBE02 User Manual

13 Update GoGear

GoGear is controlled by an internal program
called firmware. Newer versions of the
firmware may have been released after you
have purchased GoGear.
The software program called Philips Device
Manager can use your computer to check for
firmware updates that are available on the
Internet.
Install Philips Device Manager on your
computer from GoGear or download the latest
version from www.philips.com/support.
Note
•
Your music files are not affected by a firmware
update.
Manually verify / update
firmware
1
Ensure that your computer is connected
to the Internet.
2
Connect GoGear to the computer
(see section Connect and charge for
instructions).
3
On your computer, click Start >
Programs > Philips Digital Audio Player
> Device Manager to launch Philips
Device Manager.
4
Click Update
» Philips GoGear Device Manager
checks for updates and installs new
firmware from the Internet, if available.
5
When the display shows Update
completed, click OK.
6
Disconnect GoGear from the computer.
» GoGear restarts after the firmware is
updated and is ready for use again.
EN
29