Update Gogear Vibe; Manually Verify / Update Firmware - Philips GoGear ViBE SA1VBE04K/ User Manual

13 Update GoGear
Vibe
GoGear Vibe is controlled by an internal
program called firmware. Newer versions of
the firmware may have been released after you
have purchased GoGear Vibe.
The software program called Philips Device
Manager can use your computer to check for
firmware updates that are available on the
Internet.
Install Philips Device Manager on your
computer from GoGear Vibe or download the
latest version from www.philips.com/support.
Note
•
Your music files are not affected by a firmware
update.
Manually verify / update
firmware
1
Ensure that your computer is connected
to the Internet.
2
Connect GoGear Vibe to the computer
(see section Connect and charge for
instructions).
3
On your computer, click Start >
Programs > Philips Digital Audio Player
> Vibe Device Manager to launch Philips
Device Manager.
4
Click Update
» Philips GoGear Vibe Device Manager
checks for updates and installs new
firmware from the Internet, if available.
5
When the display shows Update
completed, click OK.
EN
20
6
Disconnect GoGear Vibe from the
computer.
GoGear Vibe restarts after the
»
firmware is updated and is ready for
use again.