Install Software; Connect And Charge; Connect Gogear To A Computer; Battery Level Indication - Philips GoGear SA1VBE02 User Manual

Install software

GoGear comes with the following software:
• Philips Device Manager (helps you get
firmware updates for GoGear)
• Media Converter for Philips (helps you
convert and transfer video files for
GoGear)
• Windows Media Player (helps you
convert and transfer WMP media files for
GoGear)
Important:
Remember to install the software provided in
the supplied CD-ROM for music and/or video
transfer.
Important: Before installing the software,
check that your computer meets the
requirements (see section System
requirements in this user manual).
1
Connect GoGear to your computer.
2
Insert the CD that comes with GoGear
into the CD-ROM drive of your
computer.
3
Follow the on-screen instructions to
complete the installation of the software.
If the installation program fails to start
automatically:
1
Browse the CD contents with Windows
Explorer.
2
Double click on the file that ends with
'.exe'.

Connect and charge

GoGear has a built-in battery that can be
charged through the USB port of a computer
(USB cable included).
Note
•
For first-time use, allow GoGear to charge for
3 hours.
•
The charging animation stops and the
icon is displayed when the charging process is
completed.
EN
8

Connect GoGear to a computer

1
Connect the USB plug of the supplied
USB cable to a spare USB port on your
computer.
2
Connect the small USB plug of the USB
cable to the small USB jack on GoGear.
3
Turn on your computer.
GoGear charges.
»

Battery level indication

The display indicates the approximate levels of
the battery status as follows:
100% 75% 50%
» A flashing battery screen indicates that
the battery is low. The player saves
all settings and switches off within 60
seconds.
Note
•
Rechargeable batteries have a limited number
of charge cycles. Battery life and number of
charge cycles vary by use and settings.
•
The charging animation stops and the
icon is displayed when the charging process is
completed.
Tip
•
You can conserve battery power and increase
the play time of the GoGear if you go to
> [Display settings] > [Screen off timer]
and ensure that the shortest timer setting is
selected.
25% 0%