Update GoGear
1
Ensure that your computer is connected to the Internet.
2
Connect GoGear to the computer (see section
charge for instructions).
3
On your computer, click
Audio Player > Device Manager to launch Philips Device
Manager.
4
Click
Update.
>
Philips GoGear Device Manager
installs new firmware from the Internet, if available.
5
When the display shows
6
Disconnect GoGear from the computer.
>
GoGear restarts after the firmware is updated and is ready for
use again.
Start > Programs > Philips Digital
checks for updates and
Update completed, click OK.
Connect and
15