System Setup Page - Garmin 130 Owner's Manual

System Setup Page

The System Setup Page allows you to change GPS
operation modes, use the WAAS capabilities, turn
the Message Beep and compass on or off, choose the
battery type, and set the altimeter calibration settings to
automatic or manual. See the "Appendix" for WAAS
capability information.
To access the System Setup page:
1. Press the Page button or the Menu icon
open the Main Menu.
2. In the Main Menu, scroll down and select Setup.
3. Select the System icon to open the System Setup
page.
The Option Menu allows you restore defaults or
display the current version of unit operating software and
the Unit I.D. Number. Software
updates and instructions for
downloading are available from
the Garmin Web site
(www.garmin.com).
Rino 130 Owner's Manual
®
to
System Setup Page
Choose one of the four GPS options other than Normal
to significantly save battery power. The Battery Saver
mode reduces the rate of satellite signal position updating
and the GPS Off option stops satellite signal reception
altogether. The Demo Mode simulates navigation.
To change the battery type:
1. Use the Thumb Stick to highlight the Battery
Type field and then press In.
2. Then use the Thumb Stick to select the desired
option and press In.
U O > S P
NIT PERATION ETUP AGES
87