Calibrating The Altimeter; Programming Data Fields - Garmin 130 Owner's Manual

Calibrating the Altimeter

Because the Rino 130 relies on the Barometric pressure
to determine the elevation and the pressure at any given
elevation can fluctuate, you can calibrate the altimeter
to increase its accuracy. You must know the elevation or
pressure at your current location, information you can
obtain from a map or other reliable source.
To manually calibrate the altimeter:
1. Use the Thumb Stick to access the Option Menu.
2. Highlight the Calibrate Altimeter option and press
the Thumb Stick to display the Calibration Page.
3. At the message asking "Do You Know The Correct
Elevation?" highlight the on-screen Yes button and
press the Thumb Stick In to enter your elevation.
When finished, highlight OK and press it In to
return to the Altimeter Page.
Rino 130 Owner's Manual
®
Or At the message asking "Do You Know The Correct
Pressure?" highlight the on-screen Yes button and
press the Thumb Stick In to enter your elevation.
When finished, highlight OK and press it In to
return to the Altimeter Page.

Programming Data Fields

The two user-selectable data fields support this page and
can be programmed to display the data options listed to
the right.
To program a data field:
1. Use the Thumb Stick to highlight the desired data
field and then press it In to open the data field
option pop-up window.
2. Use the Thumb Stick to move Up or Down the
menu to highlight a desired data option and then
press In to place it in the data field.
U O > A
NIT PERATION LTIMETER
P
AGE
41