Using A Goto - Garmin 130 Owner's Manual

U O > U G
NIT PERATION SING A

Using a Goto

The Goto function allows you to create a direct route to
a destination, (waypoint, city, or point of interest). Once
you have accessed the Information Page for an item,
use the Goto button at the bottom of the page to initiate
travel, using the Map and Navigation Pages for guidance.
To activate a Goto:
1. Use the Find 'N Go Menu to access the
Information Page for any desired destination and
use the Thumb Stick to highlight the Goto button.
2. Press the Thumb Stick In to start navigation.
3. Observe the Navigation Page, it displays the
name of your destination, the distance from your
current location, and a Bearing Pointer indicating
the direction you should travel. The time required
to reach your destination displays when you
begin to travel and establish a predictable rate
of movement. The Data Fields to the right of the
page display information relative to your travel.
64
OTO
4. Use the Page button or Main Page Menu
to access the Map Page and observe your
movements and a dark line indicating the direct
path from your current location to your destination.
5. Use the Bearing Pointer on the Navigation Page
to maintain travel in the right direction and observe
distance and time information to monitor your
progress.
When you are close to your destination, an "Arriving
at Destination" message appears. If you move past the
destination the Bearing Pointer reverses and the distance
increases.
To stop navigation, select the on-screen Option Menu
button at the top of the Navigation or Map Page.
Select Stop Navigation, then press the Thumb Stick In.
Viewing a Goto on the Map Page
Rino 130 Owner's Manual
®