Interface Setup Page - Garmin 130 Owner's Manual

Display—Allows you to choose from Cardinal Letters,
Degrees or Mils.
North Reference—You can choose from True, Magnetic,
Grid or User options. If 'User' is chosen, you must
correct for the Magnetic Variation. The Electronic or
GPS compass uses the North Reference setting to create
a bearing.
Switch to Compass Heading when Below–Enter the
desired speed for the Rino 130 to switch from using GPS
to using the compass for guidance.
For more than...—Enter a time limit to switch to the
compass. When you travel at the speed entered above for
the time entered here, the Rino 130 switches from GPS to
the compass.
To select either option:
1. Highlight the field and then press the Thumb
Stick In to display the options.
2. Highlight the option and press the Thumb Stick In
to activate.
Rino 130 Owner's Manual
®

Interface Setup Page

The Interface Settings Page allows you to choose from
different input/output serial data formats. This feature
is used when connecting to external NMEA devices, a
DGPS beacon receiver, a personal computer, etc. See the
Appendix for using the Rino 130 with MapSource.
To access the Interface Setup page:
1. Press the Page button or the Menu icon
open the Main Menu.
2. In the Main Menu, scroll down and select Setup.
3. Select the Interface icon to open the Interface
Setup page.
Interface Setup Page
U O > S P
NIT PERATION ETUP AGES
to
85