Operational Check For The Remote Control; Table 3: Operational Check Procedures - Motorola DCX3510-M Installation Manual

Installation

Operational Check for the Remote Control

The operational check tests communication with the remote control:
Feature Testing Procedure
Power on Press power on the remote control to turn on the DCX3510-M.
Tune to the output channel (3 or 4), if using the RF output.
Channel Scan through the channels using the channel + or - keys.
selection
Tune to several channels by entering the channel number using the numeric keys.
Volume Press volume + or - on the remote control to increase the volume to its upper limit,
control lowest level, and to a comfortable level.
Press mute to turn the sound off. Press mute again to restore the sound.
If the DCX3510-M does not operate properly, refer to the Troubleshooting section.
High-Definition DVR DCX3510-M • Installation Manual
365-095-17066-x.1

Table 3: Operational check procedures

B
31