Agile Oob Tuner Hunting - Motorola DCX3510-M Installation Manual

Diagnostics
Field Description
hexadecimal.
Network PID Displays the network PID to which the DCX3510-M is tuned to receive network
messages, in hexadecimal.
Hunt Mode The hunt mode includes Hunted, None, Round Robin (RR), Search (SRCH), Fixed
Frequency (FIX), or EMM Provider ID (EMM).
LKC The last known carrier is the last valid OOB frequency displayed in MHz and ranges
from 70 to 130 MHz, with the specific values of: 75.25, 104.20, 72.75, 92.25, 98.25,
107.25, 107.40, 110.25, 116.25, and 103.75.
LKC will remain blank during hunting if a valid carrier has not been found, and will be
populated once a valid OOB is found.

Agile OOB Tuner Hunting

Manually select an OOB frequency by pressing the Menu button while in the OOB
Status diagnostics screen. To exit this mode, press the Menu button a second time, or
press the Power button.
If the set-top is in the process of hunting for an OOB frequency, control of frequency
selection is suspended, i.e., it is not possible to press the Menu button on the OOB
status screen and display MAN FREQ when the set-top is hunting.
Summary of Manual Selection of the OOB Frequency
The manual override frequency capability is only displayed if the box is not currently
hunting and the operator presses the MENU key while OOB OSD diagnostics are
displayed. The MAN Freq displays the LKC and allows the operator to select (via scroll
up/down) a specific frequency to check if a valid OOB is on that specific frequency. The
MAN Freq parameter is the OOB frequency selected in the frequency selection mode
and displayed in MHz, with the specific values of 75.25, 104.20, 72.75, 92.25, 98.25,
107.25, 107.40, 110.25, 116.25, and 103.75.
1. When in the OOB Receiver Status Diagnostic, press the
frequency selection mode. The Front Panel displays the frequency of the last known
carrier. The OSD displays a new "MAN FREQ" line at the bottom of the screen,
which indicates the last known carrier frequency. At this point, if desired, the
frequency change mode can be exited by pressing the
2. Use the
the desired new OOB frequency is found. The new frequency selections appear on
the Front Panel and on the MAN FREQ line of the OSD. When the last known
frequency is selected, a dot appears in the middle-upper part of the Front Panel.
3. When the desired new frequency has been selected, press the
the search. The manual frequency search lasts up to 40 seconds. As the DCX3510-M
searches, the frequency being searched for flashes on the Front Panel. On the OSD,
the MAN FREQ line of text is cleared, the HUNT MODE displays FIX to indicate a
search on a fixed frequency, and the OOB FREQ field changes to the frequency
being searched for.
High-Definition DVR DCX3510-M • Installation Manual
365-095-17066-x.1
UP/DOWN
channel or cursor keys to scroll through all 10 frequencies until
MENU
button to enter the
MENU
key a second time.
SELECT
key to start
B
57