Motorola DCX3510-M Installation Manual page 91

High-definition dvr
Table of Contents

Advertisement

Diagnostics
Field
Establish IP
Connectivity
Obtain
Configuration File
eCM Registered
Network Access
Initialize BPI
System Up Time
IP Addresses
MAC Addresses
Downstream Channel (carries data from the headend to the set-top)
Carrier Lock
High-Definition DVR DCX3510-M • Installation Manual
365-095-17066-x.1
Description
• N/A — The value is invalid or cannot be retrieved, or DOCSIS is not enabled.
Displays whether the cable modem has acquired its IP address, typically from a
Dynamic Host Configuration Protocol (DHCP) server:
YES — The IP address is acquired.
NO — The set-top is acquiring its IP address.
• N/A — The value is invalid or cannot be retrieved, or DOCSIS is not enabled.
Displays whether the cable modem has downloaded its DOCSIS cable modem
configuration file from the TFTP server:
YES — The cable modem configuration file has been successfully downloaded.
NO — The set-top is downloading its cable modem configuration file.
• N/A — The value is invalid or cannot be retrieved, or DOCSIS is not enabled.
Displays whether the embedded cable modem has registered with the cable
modem termination system (CMTS):
YES — DOCSIS registration is complete.
NO — DOCSIS registration is in progress, or the set-top could not register.
• N/A — The value is invalid or cannot be retrieved, or DOCSIS is not enabled.
Displays whether the cable modem has been granted access to the DOCSIS
network:
YES — The cable modem was granted DOCSIS network access.
NO — The set-top is obtaining DOCSIS network access.
• N/A — The value is invalid or cannot be retrieved, or DOCSIS is not enabled.
The Baseline Privacy Interface (BPI) status:
YES — BPI has been successfully initialized for the cable modem.
NO — BPI initialization is in progress, has failed, or was not requested by the
network.
• N/A — The value is invalid or cannot be retrieved, or DOCSIS is not enabled.
The Days, Hours, Mins (minutes), and Seconds the DOCSIS system has been
operational. If the value is invalid or cannot be retrieved, or if DOCSIS is not
enabled, each field displays zeros.
The Cable Modem and Set-Top IP addresses in dotted-decimal format
xxx.xxx.xxx.xxx. Each byte value is padded with zeros when necessary. For
example, 10.0.1.10 is displayed as 010.000.001.010. If the value is invalid or cannot
be retrieved, or if DOCSIS is not enabled, 000.000.000.000 is displayed.
The Cable Modem and Set-Top MAC address in hexadecimal format
xx:xx:xx:xx:xx:xx. Each byte value xx ranges from 00 to FF and is padded with
zeros when necessary. For example,0:0:2D:1:F1:D is displayed as
00:00:2D:01:F1:0D. If the value is invalid or cannot be retrieved, or if DOCSIS is not
enabled, 00:00:00:00:00:00 is displayed.
• YES — The cable modem is locked to a DOCSIS downstream channel.
B
84

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents