Viewing Tide-Station Information - Garmin GPSMAP 190-01230-10 Owner's Manual

Configuring the Heading Source
You can specify the source of the heading displayed on the wind
gauge. Magnetic heading is the heading data received from a
heading (or magnetic) sensor, and GPS heading data is calculated by
your chartplotter GPS.
From the Home screen, select
wind MENU Heading
> >
Selecting the Range of the Close Hauled Wind
Gauge
You can specify the range of the close hauled wind gauge for both
the upwind scale and the downwind scale.
From the Home screen, select
Wind > MENU.
• Select Change Upwind
minimum angle values that appear when the upwind close
hauled wind gauge appears.
• Select Change Downwind
minimum angle values that appear when the downwind close
hauled wind gauge appears.
GPSMAP 400/500 Series Owner's Manual
information > dashboard
Source.
Information > Dashboard
Scale. Set the maximum and
Scale. Set the maximum and

Viewing Tide-station Information

NOTE: You must use a BlueChart g2 Vision card to view Tide-
station information.
1. Select Information
2. Select a tide station. Tide-station information is shown.
>
>
Select Change Date
different date.
Select Show Report
selected station.
Viewing Information
> Tides & Currents > Tides.
> Manual to view tide information for a
to view the Tide Prediction Report for the