Garmin GPSMAP 190-01230-10 Owner's Manual page 35

To clear the active track:
From the Navigation or Perspective 3D chart, select
Waypoints & Tracks > Active Tracks
The track memory is cleared. The current track continues to be
recorded.
To retrace the active track:
1. From the Navigation or Perspective 3D chart, select
Waypoints & Tracks > Active Tracks
2. Select either the time the current track began or
3. Follow the colored line on the screen.
To edit or delete a saved track:
1. From the Navigation or Perspective 3D chart, select
Waypoints & Tracks > Saved
2. Select the track you want to edit or delete.
3. Select Edit Track to change the name or color of the track, or
select Delete to delete the track.
To set active Track Options:
From the Navigation or Perspective 3D chart, select
Waypoints & Tracks > Active Track
Record Mode—select Off, fill, or wrap.
• Off—does not record a track log.
• fill—records a track log until the track memory is full.
GPSMAP 400/500 Series Owner's Manual
MENU >
> Clear Active Track.
MENU >
> Follow Active Track.
Entire Log.
MENU >
Tracks.
MENU >
> Active Track Options.
• wrap—continuously records the track log, replacing the oldest
track data with new data.
Record interval—defines the frequency at which the track plot is
recorded. Recording more-frequent plots is more accurate but fills
the track log faster.
• interval—sets whether the interval is determined by distance,
time, or resolution. (Select
• distance—records the track based on a distance between points.
• Time—records the track based on a time interval.
• Resolution—records the track plot based on a variance from
your course. This setting is recommended for the most-efficient
use of memory. The distance value (Change) is the maximum
error allowed from the true course before recording a track point.
• Change—sets the value of the interval.
Track Color—sets the color of the track plot.
Where To?
Change to set the value.)
2