Connect - Navman EZY15/45 MY80T/85XLT/90XLT User Manual

Complete the following:
If you want to ...
install a voice command file,
remove a voice command file,

CONNECT

CONNECT is a NavDesk application that allows you to search and install local POIs information from your
computer to your Navman. POI locations will be shown in My Places.
Before you begin, ensure your Navman is correctly plugged into your computer: plug the large end of the
USB cable directly into a USB port on your computer (not a USB hub); plug the small end into
bottom of your Navman.
Make sure you have an active Internet connection for this feature.
NavDesk CONNECT
How do I search for a POI using Connect?
You can either search for a new location, or search using the last known location on your Navman by
completing the following:
1. In the Select Location field, select a custom location to search.
Follow the prompts to select your Country
preference.
Alternatively, you can select the Use the last known location on my device option to search if your
Navman stores the navigation data.
Then ...
in the Available voice command files section, select the voice file you would
like to install.
Click Install selected voices.
in the Installed voice command files section, select the voice file you would
like to remove.
Click Remove selected voices.
CONNECT is not available on all models.
Region/State
87
Place name, and then select your
on the