• set a location as the start point, a via point, or the destination • have the M-Nav 750 calculate the route then guide you along it with clear visual and verbal instructions • check for places and points of interest such as fuel stops, nearby or along your route.
fi nal destination, and any via points between. Route When you have defi ned all the via points in your trip, the M-Nav 750 will calculate the best route automatically after it obtains a GPS fi x. Your route...
The M-Nav 750 is supplied with a suction mount designed for installation on a vehicle windscreen. (If you do not want to mount the M-Nav 750 on the windscreen, use the optional Permanent Installation Kit.) Check that you have ALL of these items before you start the installation. Contact your supplier if anything is missing.
M-Nav 750 | User Manual M-Nav 750 Parts Familiarise yourself with the parts of your M-Nav 750 before starting the installation.
Page 9
Standby button Press to toggle the M-Nav 750 between operating and standby state. When the M-Nav 750 is in standby state and the screen is blank, just press the standby button to re-display the most recent screen. (Note: if the M-Nav 750 internal battery has discharged the splash screen will be displayed instead).
When you have assembled the docking cradle, you can either: • use the suction mount to attach the M-Nav 750 to the vehicle windscreen, or • use the optional hard installation kit to attach the M-Nav 750 to a hard surface, such as the top of the dashboard Assemble the Docking Cradle Connect the suction mount to the cradle fi...
Insert the RJ-45 cable (already fed through the dashboard from the Qube tracking device) into the RJ-45 connection socket at the back of the docking cradle. Put the bottom of the M-Nav 750 into the docking cradle, and then push the M-Nav 750 gently back until it snaps into place with an audible click.
Note: The following sequence of screens will appear the FIRST time that you use your M-Nav 750, OR whenever the internal battery in the M-Nav 750 has gone fl at (this can happen if you have not used your M-Nav 750 for several days). Otherwise, your M-Nav 750 will re-display the last screen that you used.
Vehicle Inspection Note: The ‘’Vehicle Inspection’ option may not be available in your market. Contact your supplier for more information. If these screens appear you cannot use the M-Nav 750 until you enter these details. If the ‘Vehicle Inspection’ screen appears, you must inspect your vehicle, and then touch Accept.
Your M-Nav 750 has an internal GPS (Global Positioning System) antenna so that you can always receive a GPS signal, fi nd your current location and use the M-Nav 750 for navigation. For best operation, ensure that your M-Nav 750 is positioned where it has a good view of the sky.
Check the Qube Tracking Device Status Your M-Nav 750 is connected to a Qube tracking device that communicates information about your vehicle to the OnlineAVL2 application. The Qube tracking device also enables you and your fl eet administrator to send and receive messages to each other (see Section 5).
If you had to enter your Driver PIN and your work status details (as described in Section 4.2) before you could use the M-Nav 750, you must use Logoff when you have fi nished work. Note: These screens appear only if your fl eet administrator has setup the Driver Logon and Driver Status functions in the OnlineAVL2 application.
M-Nav 750 | User Manual 5 Messages IMPORTANT: The M-Nav 750 must be in the docking cradle and connected to the Qube tracking device in order for you to send and receive messages and otherwise communicate with your fl eet administrator through the OnlineAVL2 application.
Reply with a Canned Template Note: This section assumes that the message you want to reply to is already displayed on the M-Nav 750. Any previous replies to that message are also displayed in sequence (up to a maximum of 30 replies).
Messages’ screen (see Section 5.3) then touch New. If you want to create your own reply to a message that is already displayed on the M-Nav 750, touch Reply. Note: You can reply to a message more than once. Just touch the message to display it again, with any previous replies.
M-Nav 750 | User Manual Delete a Message Note: This section assumes that the message you want to delete is already displayed on the M-Nav 750. Touch Delete. The ‘Confi rm Message Delete’ box is displayed on the screen immediately.
Touch Go to exit from Messages and navigate to the location mentioned in the route-to message. The M-Nav 750 immediately calculates the new route starting from your current location, then displays the navigation map and starts to give verbal directions.
M-Nav 750 | User Manual 6 Navigation Basics Display & Move the Map Press the Hot Button on the top of the M-Nav 750 to display the ‘Main Menu’. Touch Nav. to display the map. Drag your fi nger across the screen to move the map in the same direction.
M-Nav 750 | User Manual Map Icon Description Start recording your GPS position. Use the Navigation menu item GPS Logs to view the recorded logs on the map. Stop recording your GPS position. Battery status. Navigation Icons The route map has some special icons that help you navigate along the route and manage your schedule.
You can also set then save the volume at a specifi c level or mute it. To set and save the volume at a specifi c level, press the Hot Button on the top of the M-Nav 750 to display the ‘Main Menu’. Touch Nav. to display the map.
Dawn and dusk are estimated automatically by your M-Nav 750. To show the map in night vision mode, press the Hot Button on the top of the M-Nav 750 to display the ‘Main Menu’. Touch Nav. to display the map. Touch Menu.
M-Nav 750 | User Manual How to Enter Data & Remove Errors WARNING: Do NOT enter data while you are driving. When you need to enter data such as a street address, the onscreen keyboard is displayed automatically. You can toggle the onscreen keyboard between numbers OR characters, whenever you want, by touching 123 (or ABC) in the lower right corner.
The street address that you touched is shown on the map with a list of options. Touch Navigate to if you want the M-Nav 750 to calculate a route to that location. If you want to add one or more via points along the route, see Section 8.2.
The navigation map displays the postal code location and a list of options. Touch Navigate to if you want the M-Nav 750 to calculate a route to that location. If you want to add one or more via points along the route, see Section 8.2.
M-Nav 750 | User Manual Find Other Types of Location You can use the M-Nav 750 to fi nd other types of location, such as named junction, press the Hot Button on the top of the M-Nav 750 to display the ‘Main Menu’.
M-Nav 750 | User Manual Find a POI To fi nd a POI, press the Hot Button on the top of the M-Nav 750 to display the ‘Main Menu’. Touch Nav. to display the map. Touch Menu to display the ‘Navigation main menu’.
The M-Nav 750 immediately calculates a route from your present location, shows the route on the map, and starts to give verbal instructions. Note: If you take a wrong turn, the M-Nav 750 will automatically re-calculate a new route to your destination.
M-Nav 750 | User Manual Set Location as Home To set your home location, press the Hot Button on the top of the M-Nav 750 to display the ‘Main Menu’. Touch Nav. to display the map. Touch Menu to display the ‘Navigation main menu’.
Set a Location as a Favourite Place To set a location as a favourite place, press the Hot Button on the top of the M-Nav 750 to display the ‘Main Menu’. Touch Nav. to display the map. Touch Menu to display the ‘Navigation main menu’.
• from your present location (see Section 7.5) OR • from any other location that you specify. Then, as soon as you enter the destination, the M-Nav 750 will calculate the route for you. When the route is calculated, you can: •...
Add a Location as a Via Point Note: This section assumes that the M-Nav 750 is showing your current route on the map. When the M-Nav 750 has calculated a route, you can add one or more locations as via points to visit along the route or to detour to.
M-Nav 750 | User Manual Show / Add Places Along the Route Note: This section assumes that the M-Nav 750 is showing your current route on the map. When the M-Nav 750 has calculated a route, you can search for useful places along the route, such as hotels or banks.
M-Nav 750 | User Manual Optimise / Change the Order of the Via Points Note: This section assumes that the M-Nav 750 is showing your current route on the map. When the M-Nav 750 has calculated a route, you can show a list of all the via points and optimise their order, if necessary, to make your route more effi...
Add a Detour to Avoid an Area WARNING: Add a detour while the vehicle is stationary. Note: This section assumes that the M-Nav 750 is showing your current route on the map. To calculate a detour (e.g. to avoid extensive road works), touch Route to show the ‘Route’...
The route is immediately deleted and an updated list of your saved routes is displayed. Delete a Route Note: This section assumes that the M-Nav 750 is showing your current route on the map and that you have not saved the route. Touch Route to show the ‘Route’ menu.
• show all the manoeuvres along the route Show an Overview of this Route Note: This section assumes that the M-Nav 750 has calculated the route and is showing it on the map. Touch Route. The ‘Trip’ menu is displayed.
M-Nav 750 | User Manual Show Total Time & Distance Note: This section assumes that the M-Nav 750 has calculated the route and is showing it on the map. Touch Route. The ‘Trip’ menu is displayed. Touch Trip Summary. The start and destination locations, the total distance, and the estimated time are immediately displayed.
If you are driving a truck and have specifi ed your truck attributes, the M-Nav will also use this information when calculating the routes. You can also setup the date format, time format, and language shown on the M-Nav 750 to suit your own preferences.
M-Nav 750 when calculating the routes. Note: This option may not be available in your market. Contact your supplier for more information. Press the Hot Button on the top of the M-Nav 750 to display the ‘Main Menu’.
10.3 Set Road Types to Avoid WARNING: The M-Nav 750 can calculate a route that avoids certain types of road that you specify (e.g. toll roads) unless there is no alternative route. In this case, the route will use these road types but will not advise you of this.
The M-Nav 750 can calculate your routes so that they always exclude certain types of road that you specify (e.g. unpaved roads). Note: If there is no alternative road type, the M-Nav 750 will not be able to calculate a route. Note: This section assumes that no current route is displayed on your M-Nav 750.
10.6 Set Date / Time Formats To set the date format, press the Hot Button on the top of the M-Nav 750 to display the ‘Main Menu’. Touch Settings to display the ‘Settings’ menu. Touch Units. The ‘Units’ menu is displayed with the current date format and time format.
You must use either a geographic time zone OR a custom time zone. You cannot use both. To set the geographic time zone or a custom time, press the Hot Button on the top of the M-Nav 750 to display the ‘Main Menu’.
The ‘Time settings’ screen is re-displayed immediately with the new custom time zone. 10.8 Set Language The M-Nav 750 can operate in a variety of languages. To set the language, press the Hot Button on the top of the M-Nav 750 to display the ‘Main Menu’.
M-Nav 750. To change the current ‘Choose Language at Startup’ setting, press the Hot Button on the top of the M-Nav 750 to display the ‘Main Menu’. Touch Settings to display the ‘Settings’ menu.
M-Nav 750 | User Manual 10.10 Restore Factory Default Settings In the unlikely case of any problems with your M-Nav 750 device that you cannot otherwise resolve, you can restore the factory default settings. WARNING: This option will remove all of your customised settings and stored information except your map selection.