How Do I Connect My Navman To My Computer - Navman EZY255LMT User Manual

How do I connect my Navman to my
computer?
CAUTION: For optimal performance of the lithium battery:
• Do not charge the battery where the temperature is high (e.g. in direct sunlight).
• There is no need to fully discharge the battery before charging. You can charge the battery
before it is discharged.
• When storing the product for a long period of time, be sure to fully charge the battery at least
once every two weeks. Over discharge of the battery can affect the charging performance.
• Failure to follow the battery usage instructions could cause damage to your device, battery
and even bodily injury or property damage and will void any warranty.
1. Turn on your computer.
2. Plug the large end of the USB cable directly into a USB port on your computer (not a
USB hub) and plug the small end into the mini-USB connector on your Navman.
3. When your Navman is turned on and connected to the computer, you can select the
desired connection type from the pop-up message screen:
ƒ Charge only: You will be able to continue using your Navman with the battery in
charging mode via the computer.
ƒ Computer: Your Navman will be recognised as an external mass-storage device
named by the model name. A USB connection screen will appear to prevent you
from using your Navman.
Note: DO NOT delete any files that are pre-installed on the device. Deleting the files can
cause the device to crash. Navman is not responsible for product quality caused by file
deletion.
Before disconnecting your Navman from the computer, it is recommended to
safely remove the USB drive from the system. This prevents data loss on the device.
11