Key Dimensions And Specifications; Stacking Kit Installation - LG DLEX2801W Owner's Manual

OPTIONAl_ACCESSORIES
STACKING KiT INSTALLATION ccont.
|
Washer
Place the dryer on top of the washer by
fitting the dryer feet into the side brackets as
illustrated. Avoid finger injuries; do not allow
fingers to be pinched between the washer
and dryer. Slowly slide the dryer toward the
back of the washer until the side bracket
stoppers catch the dryer feet.
Insert the front rail between the bottom of
the dryer and the top of the washer. Push the
front rail toward the back of the washer until it
comes in contact with the side rail stoppers.
Install the two remaining screws to secure the
front rail to the side rails.
SPECIFICATIONS
KEY DiMENSiONS AND SPECiFiCATiONS
The appearance and specifications listed in this guide may vary due to constant product improvements.
Description Steam Dryer
Electrical Requirements* Please refer to the rating label regarding detailed information.
Gas Requirements* NG: 10-13 in. WC/LP: 10-13 in. WC (Gas Models only)
Dimensions 27" (W) X 30" (D) X
3811/16"
(H), 51" (D with door open)
68.6 cm (VV)X 76.1 cm (D) X 98.3 cm (H), 129.7 cm (D with door open)
Net Weight 136.6 Ibs. (62 kg)
Drying Capacity
= Normal Cycle IEC 7.4 cu.ft. (22.5 Ibs./10.2 kg)
\, Steam Cycle IEC 7.4 cu.ft. (8 Ibs./3.6 kg) ./
*Refer to the rating plate on your dryer.
45