Before Calling For Service - LG DLEX2801W Owner's Manual

T OUBLESHOOTING
BEFORE CALLING FOR SERVICE (cont.)
Steam doesn't
generate but no error
code is shown.
Garments still
wdnkled after
STEAMFRESH'".
There are no creases
left on garment after
STEAMFRESH
TM.
Garments have
static after REDUCE
STATIC.
Garments are too
damp or too dry after
REDUCE STATIC.
Garments are not
uniformly damp after
EASY iRON.
Water drips from door
during Steam Cycle.
Steam is not visible
during Steam Cycle.
Drum does not turn
during Steam Cycle.
Cannot see steam
vapor at the
beginning of cycle.
The display shows
bt 9.
Odors remain in
clothing after
STEAMFRESH'".
FLOW SENSE
indicator light is on
during the drying
cycle
• Water level error.
• Too many or too different
types of garments in dryer.
• The function of this cycle
is to remove wrinkles from
fabric.
• This is normal.
• Correct drying options not
selected.
• This is normal.
• This is normal.
This is normal.
• This is normal.
• This is normal.
• MORE TIME button pressed.
. STEAMFRESH _'_ did not
remove odor completely.
• Ductwork is too long or has
too many turns/restrictions.
• Significant blockage of the
ductwork due to lint buildup
or debris.
• Unplug dryer and call for service.
Small loads of 1 to 5 items work best.
• Load fewer garments. Load similar-type garments.
• Use an iron to make creases.
• Depends on individual moisture level in skin.
• Select load weight manually before starting
REDUCE STATIC option.
• Depends on the amount or type of garments.
This is steam condensation on door surface.
o
o
Steam vapor is difficult to see when the door is
closed.
The drum is turned off so that the steam vapor
remains in the drum.
Steam is released at different stages of the cycle
for each option.
o
o
Pressing the MORE TIME button several times will
set the cycle for a large load such as a comforter.
Fabrics containing strong odors should be
washed in a normal cycle.
Install a shorter or straighter duct run. See the
Installation Instructions.
Ductwork should be checked/cleaned soon.
Dryer can be used in this condition, but drying times
may be longer.
58