Custom Pois (Points Of Interest) - Garmin StreetPilot 7200, 7500 Owner's Manual

a
PPendix
Setting Up the 7500 Software for DR
From the Menu page, touch
Dead reckoning Setup
>
odometer Wave type—select
Wave. Determine the proper setting by contacting the
vehicle manufacturer or by using an oscilloscope. Square
Wave is the most common type.
reverse light Polarity—select
the vehicle manufacturer for polarity or check with a
voltmeter. Set to High (most common) if a positive,
high voltage is detected when the reverse lights are
illuminated. Set to Low if no voltage or low voltage is
detected when the reverse lights are illuminated.

Custom POIs (Points of Interest)

Your StreetPilot 7200/7500 accepts custom POI
databases, available from various companies on the
Internet. Some custom POI databases contain alert
information for points such as safety cameras and
5
Settings > navigation >
> Settings.
Square Wave Sine
or
high or low. Contact
school zones. Your StreetPilot can notify you when you
approach one of these points.
After downloading your POI database, use the Garmin
POI Loader to install the POIs into your unit. The POI
Loader is available at www.garmin.com/products/sp7500
for the 7500 and www.garmin.com/products/sp7200
the 7200. Select updates and
POI Loader Help file for more information; press F1 to
open the Help file.
caution: Garmin is not responsible for the
consequences of using a custom POI database or
the accuracy of third-party data.
To view your custom POIs, touch
extras > custom Pois.
Deleting Custom POIs
To delete all of the custom POIs, go to the Menu page
and then touch tools > my Data
Delete all.
Downloads. Refer to the
Where to? >
> custom Pois >
StreetPilot 7200/7500 Owner's Manual
for