Garmin StreetPilot 7200, 7500 Owner's Manual page 51

guidance—turn on the vocal guidance prompts. Select
Speak Key only to hear the voice prompts only when
you press the SPeaK key on the remote control.
attention tone—turn on or off the attention tone
sounded before voice prompts.
touch Screen tone—turn on or off the tone sounded
each time you touch the screen.
Keypress tone—turn on or off the tone sounded each
time you press a button on the remote.
Speed adjusted Volume—select how much the volume
increases as your speed increases: low, medium, or
high. To manually control the volume, select off.
audio Jack—select headphones
line out
headphones. Select
the audio input of another device (like a car stereo), and
excessive audio noise is heard.
StreetPilot 7200/7500 Owner's Manual
when using
if you are connecting to
Configuring Video Input
The StreetPilot supports NTSC (North America) and
PAL (Australia) composite video input. From the Menu
page, touch Settings > general
input type—select the video input type:
backup camera. For more information about setting up
the backup camera, see page
Detection response—select how the StreetPilot
switches to the video. This setting changes to
response when backup camera
Volume—opens the Adjust Volume Level page. See
page 41.
View Source—displays the video source.
note: When you switch from the video input
to the navigation screens, the screen momentarily
turns black and then the navigation screens
appear. This is normal.
c y s
UstoMizinG oUr treet
> Video input.
DVD/video
34.
reverse
is selected.
P
iLot
or