Loading Files On Your Streetpilot; Step 1: Load The Usb Drivers; Step 2: Connect Ac Power; Step 3: Insert An Sd Card (Optional) - Garmin StreetPilot 7200, 7500 Owner's Manual

Your StreetPilot 7200/7500 can store files, such as MP3
music files and Custom POIs. Using the USB Mass
Storage mode, copy and paste files to the StreetPilot
internal memory or to an optional SD card.

Step 1: Load the USB Drivers

Before connecting the USB cable to your computer,
place the enclosed USB driver disk into your computer's
disk drive.
If the program does not start automatically, click
and then run.... Type the letter of your disk drive
followed by "setup" (example: "D:\setup"). Then press
enter.
Follow the instructions on your computer's screen.
StreetPilot 7200/7500 Owner's Manual
l f f
oadinG iles on iles on
Start
y y s s P P
oUr oUr TreeT TreeT iloT iloT

Step 2: Connect AC Power

Connect the enclosed AC Power cable to the Power
connector on the right side of the StreetPilot. Connect
the end to an available electrical outlet.

Step 3: Insert an SD Card (Optional)

The SD card slot is located on the left-hand side of the
StreetPilot. Press the card in until it clicks.
Inserting an SD Card
L f y s
oadinG iLes on oUr treet
P
iLot
2