Table of Contents
Advertisement
Back to Contents Page
Fan
Dell Inspiron™ 6000 Service Manual
Removing the Fan
Replacing the Fan
Removing the Fan
CAUTION:
Before you perform the following procedures, see the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
1. Follow the instructions in
"Preparing to Work Inside the
2. Remove the
Mini PCI card
(if applicable) and the
3. Remove the
hard
drive.
4. Remove the
hinge
cover.
5. Remove the keyboard.
6. Remove the
display
assembly.
7. Remove the
palm
rest.
8. Remove the two M2.5 x 5-mm screws, and disconnect the connector that connects the fan to the system board.
9. Lift the fan out of the computer.
1 fan
2 M2.5 x 5-mm screws (2)
3 fan cable
4 system board connector
Computer."
optical
drive.
Advertisement
Table of Contents
