1 display panel screw #1
2 display panel
3 display cover
4 display panel screw #5
5 M2 x 3-mm screws (8)
8. Press in both sides of the top flex-cable connector, and pull the top flex-cable connector away from the display connector.
9. Use the pull-tab to disconnect the bottom flex-cable connector from the inverter connector.
1 pull-tab on bottom flex-cable connector
2 top flex-cable connector
3 display connector
4 inverter connector
Replacing the Display Panel
1. Reconnect the top flex-cable connector to the top display connector.