Intel S2600CO Family Technical Product Specification page 98

Intel® Server Board S2600CO Family TPS
Color State
Amber ~1 Hz blink Non-critical -
System is
operating in a
degraded state
with an impending
failure warning,
although still
functioning
Amber Solid on Critical, non-
recoverable –
System is halted
Revision 1.0
Criticality
failed/disabled but functional memory remains available)
Correctable Errors over a threshold and migrating to a spare DIMM
(memory sparing). This indicates that the user no longer has spared
DIMMs indicating a redundancy lost condition. Corresponding DIMM
LED lit.
Uncorrectable memory error has occurred in memory Mirroring Mode,
causing Loss of Redundancy.
Correctable memory error threshold has been reached for a failing
DDR3 DIMM when the system is operating in fully redundant RAS
Mirroring Mode.
Battery failure.
BMC executing in uBoot. (Indicated by Chassis ID blinking at Blinking
at 3Hz). System in degraded state (no manageability). BMC uBoot is
running but has not transferred control to BMC Linux. Server will be in
this state 6-8 seconds after BMC reset while it pulls the Linux image
into flash
BMC booting Linux. (Indicated by Chassis ID solid ON). System in
degraded state (no manageability). Control has been passed from
BMC uBoot to BMC Linux itself. It will be in this state for ~10-~20
seconds.
BMC Watchdog has reset the BMC.
Power Unit sensor offset for configuration error is asserted.
HDD HSC is off-line or degraded.
Non-fatal alarm – system is likely to fail:
Critical threshold crossed – Voltage, temperature (including HSBP
temp), input power to power supply, output current for main power rail
from power supply and PROCHOT (Therm Ctrl) sensors.
VRD Hot asserted.
Minimum number of fans to cool the system not present or failed
Hard drive fault
Power Unit Redundancy sensor – Insufficient resources offset
(indicates not enough power supplies present)
In non-sparing and non-mirroring mode if the threshold of correctable
errors is crossed within the window
Correctable memory error threshold has been reached for a failing
DDR3 DIMM when the system is operating in a non-redundant mode
Fatal alarm – system has failed or shutdown:
CPU CATERR signal asserted
MSID mismatch detected (CATERR also asserts for this case).
CPU 1 is missing
CPU Thermal Trip
No power good – power fault
DIMM failure when there is only 1 DIMM present and hence no good
memory present
Runtime memory uncorrectable error in non-redundant mode.
DIMM Thermal Trip or equivalent
SSB Thermal Trip or equivalent
CPU ERR2 signal asserted
BMC\Video memory test failed. (Chassis ID shows blue/solid-on for
this condition)
Both uBoot BMC FW images are bad. (Chassis ID shows blue/solid-
on for this condition)
240VA fault
Fatal Error in processor initialization:
Processor family not identical
Processor model not identical
Processor core/thread counts not identical
Processor cache size not identical
Unable to synchronize processor frequency
Unable to synchronize QPI link frequency
Intel order number G42278-002
On-board Connector/Header Overview
Description
1
.
87