Templates; Reports - Garmin NavTalk NavTalk GSM Owner's Manual

Message Templates
Message templates are messages that, once created, can be used
over and over or sent to more than one recipient.
To create a Message Template
1. Highlight the on-screen 'New' button and then press ENTER to display
the New Message dialog fi eld.
2. Use the ARROW key to move to the fi eld and then press ENTER to
begin entering the fi rst character of the text message.
3. Then highlight the on screen 'Save' button and press to display the save
options menu. Highlight 'Save To Template' and press ENTER.
To use a Message Template
1. Highlight the desired pre-constructed message from the Template List
and then press ENTER to display the Send Message page.
2. Highlight the 'To' button an press ENTER to select a recipient from the
message from Contacts or highlight the recipient fi eld and enter
a phone number, then highlight the 'Send' button and press ENTER.
Or... while composing a message, press MENU and select 'Insert Template'
and select a template to insert in your message.

Reports

Reports allow you to report your position to another NavTalk unit.
The Reports List displays those Status Reports.
o create a Status Report or a Status Request
T
1. Access the Messages Page from the Phone Tab of the Main Menu.
2. Select the 'New' button and press ENTER for the New Messages Page.
3. With the New Message Page displayed, press the MENU key to display
the Options Menu, then select 'Status Report' and press ENTER to
display the Send Status Report Page.
Section 3
Phone Operation
Messages
Select a message from the
Templates List.
Signature
Message
selected
from the

Templates

List
Message Templates List
Template inserted in a Message
Reports List Options
Send To Entry using
Contacts
Reports List
Repeat - Timeout
Status Report
Hours/Minutes Option
Message recipient selected
from Contacts.
Request for a
StatusReport
Choosing the
Repeat option
allows your posi-
tion to be sent as
you move about at
set intervals until
the timeout option
ends reporting.
41