Waypoints - Garmin NavTalk NavTalk GSM Owner's Manual

Using the 'Average Location' Option
You can average location calculations to create a more accurate
waypoint by reducing the effects of GPS location errors. It is important
to remember that when you average a waypoint from the Waypoint
List or create a new waypoint without actually being at the site of
the waypoint, the location for that waypoint will be changed to your
current GPS location.
To Average a Location:
1. With the waypoint page displayed, press the MENU key to display the
Waypoint Option Menu.
2. With 'Average Location' highlighted, press the ENTER key to display the
'Average Location' Page.
3. Observe the 'Estimated Accuracy' fi eld and press the ENTER key with
'Save' highlighted when the estimated accuracy reaches the desired
value.
4. Press the CLEAR key to cancel 'Average Location' and leave the
waypoint unchanged.
Section 4
GPS Navigation

Waypoints

Press MENU key to
display 'Average
Location' option.
Average Location Option
Estimated Accuracy
Field
Number of
measurements used
to calculate accuracy
Average Location Page
91