What To Do When - Kenmore 385.17126690 Service Manual

SEWING MACHINE DIV.20 MODEL 385. 17822490
WHAT TO DO WHEN
CONDITION CAUSE HOW TO FIX REFERENCE
INSERT T HENEEDU_ PROPERLY.
1. SKIPPING
STITCHES
2. FABRIC NOT
MOVING
1. NEEDLE IS NOT INSERTED
PROPERLY.
2. NEEDLE IS BENTOR WORN.
3. INCORRECTLY THREADED.
4. NEEDLE OR THREAD ARE
INAPPROPRIATE FOR
FABRIC BEING SEWN.
5. SEWING ON STRETCH
FABRIC.
6. PRESSER FOOT PRESSURE
ISTOO WEAK.
7. INAPPROPRIATE NEEDLE
BAR HEIGHT.
8. INAPPROPRIATE NEEDLE
TO SHU1TLE TIMING.
9. INAPPROPR_TE NEEDLE
TO SHUI"[LECLEARANCE.
1. PRESSER FOOT PRESSURE
ISTOO WEAK.
2. INCORRECT F.D. HEIGHT.
3. F.D. IS IN DOWN POSITION.
4. THREAD ON BOIrOM SIDE
OF FABRIC IS JAMMED UP.
5. FEED DOG TEETH ARE
WORN.
CHANGE THE NEEDLE.
RETHREAD.
USETHE RECOMMENDED
SEWINGNEEDLE AND THREAD.
USEA#t I BLUETIP NEEDLE,
ADJUST THE PRESSER BAR
LEVEL TO MAKE THE
PRESSURE STRONGER.
SEE MECHANICAL
ADJUSTMENT
"NEEDLE BAR HEIGHT'.
SEEMECHANICAL
ADJUSTMENT
"NEEDLE TO SHUTTLE TIMING".
SEE MECHANICAL
ADJUSTMENT "NEEDLE
CLEARANCE TO SHUTTLE."
ADJUST THE PRESSERBAR
LEVEL TO MAKE THE
PRESSURE STRONGER.
SEEMECHANICAL
ADJUSTMENT "FEED DOG
HEIGHT."
RAISE THE F.D. LEVEL.
MAKE SURE TO BRING
BOTH NEEDLE AND BOBBIN,
THREAD UNDER THE FOOT
WHEN STARTING SEWING.
CHANGE THE FEEDDOG.
P,22, 23
P.24,25
P.26
P.20, 21