Speakers - HP Pavilion dm1 Maintenance And Service Manual

9. Remove the top cover (2).
Reverse this procedure to install the top cover.

Speakers

Description
Speaker Kit (includes left and right speakers and cable)
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
a. Service cover (see
b. Keyboard (see
c. Top cover (see
Remove the speakers:
1. Turn the top cover upside down, with the front edge toward you.
2. Release the speaker cables from the clips built into the TouchPad (1) and top cover (2).
3. Release the speakers from the clips (3) built into the top cover.
Battery on page 44), and then remove the following components:
WLAN module on page
Keyboard on page 58)
Top cover on page 68)
48)
Component replacement procedures
Spare part number
659508-001
71