Using The Mark Key; To Mark The Cursor Or Navaid Position With The Mark Key; Section 7: Waypoints - Garmin GPSMAP 235 Sounder Owner's Manual

GETTING START-
SECTION
WAYPOINTS
ED
7

Using the MARK Key

Using the GOTO
Key
A
B
A. To create a waypoint at an on-screen navaid, move
the cursor over the desired navaid.
B. Press the MARK key and select the 'Use Navaid
Posn?' option. Press EDIT/ENTER to finish.
54
Mark Key (con't.)
The mark key can also be used on the Map Page to mark the cursor position or
an on-screen navaid. To mark a navaid, select it with the cursor. The sounder will
use the navaid text shown on the cartography as the default comment.
To mark the cursor or navaid position with the
R
1. Use the keypad to move the cursor to the desired position or navaid.
M
2. Press the key.
3. Highlight the 'Use Map Posn?' or the 'Use NAVAID Posn?' option and press
4. To accept the waypoint with the default name, symbol and comment (the depth at that
T
position), press .
5. To enter a different name, symbol or comment, highlight the appropriate field and press
T
the key.
6. After entering and confirming your changes, move the field highlight back to the 'Done?'
T
prompt and press .
M
key:
T
.