Standard Cmos Setup; Advanced Setup - ECS PT880PRO-A Manual

30

Standard CMOS Setup

This option displays basic information about your system.
System Time
System Date
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
SATA-1
SATA-2
Floppy A
F1:General Help
Date and Time
The Date and Time items show the current date and time on the computer. If
you are running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
Primary/Secondary IDE Master/Slave, SATA-1~2
Your computer has one IDE channel and each channel can be installed with one or two
devices (Master and Slave). In addition, this motherboard supports two SATA channels and
each channel allows one SATA device to be installed. Use these items to configure each
device on the IDE channel.
Floppy A
These items set up size and capacity of the floppy diskette drive(s) installed in the
system.
Press <Esc> to return to the main menu setting page.

Advanced Setup

This page sets up more advanced information about your system. Handle this page with
caution. Any changes can affect the operation of your computer.
Quick Boot
1st Boot Device
2nd Boot Device
3rd Boot Device
Try Other Boot Device
Bootup num-Luck
Boot to OS/2 > 64MB
AGP Aperture Size
DRAM timing
Hyper Threading Tecnnology
Auto Detect DIMM/PCI Clk
Spread Spectrum
Max CPUID Value Limit
CPU TM function
F1:General Help
CMOS Setup Utility - Copyright (C) 1985-2004, American Megatrends, Inc.
Standard CMOS Setup
14: 02: 44
Wed 05/05/2004
Not Detected
Not Detected
Not Detected
Not Detected
1.44 MB 3 1 / "
2
: Move Enter : Select +/-/: Value
F9: Optimized Defaults
CMOS Setup Utility - Copyright (C) 1985-2004, American Megatrends, Inc.
Advanced Setup
Enabled
HDD:SS-ST3120026AS
CD/DVD:3M-Pioneer D
1st Floppy Drive
Yes
On
No
64MB
Auto BY SPD
Enabled
Enabled
Disabled
Disabled
TM1
Enter : Select
: Move +/-/: Value
F9: Optimized Defaults
Using BIOS
Help Menu
Use [ENTER], [TAB]
or [SHIFT-TAB] TO
select a field.
Use [+] or [-] to
configure system Time.
F10: Save ESC: Exit
Help Menu
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
F10: Save
ESC: Exit