Garmin GPSMAP 276C Owner's Manual page 41

Garmin chartplotting receiver owner's manual
Hide thumbs Also See for GPSMAP 276C:
Table of Contents

Advertisement

2. Highlight the field below Proximity Alarm, and press
ENTER.
3. Select the On or Off setting, and press ENTER.
To add a proximity waypoint:
1. From the Proximity sub tab, use the ROCKER to highlight
an empty line on the Proximity List, and press ENTER. The
Find Menu opens.
2. Select a waypoint or point of interest from the Find Menu.
3. With OK highlighted, press ENTER to select the point. The
distance field is now highlighted. Press ENTER to begin
entering the proximity radius.
4. Use the ROCKER to enter a distance value (up to 99.99
units), and press ENTER.
GPSMAP 276C Owner's Manual
M
M
ArIne
To clear one or all proximity waypoints from the list:
1. Highlight the Points tab on the Main Menu, and then select
the Proximity sub tab.
2. Highlight the proximity waypoint to clear, and press MENU.
Proximity Points Tab Options Menu
3. To clear a single alarm, highlight Remove Point, and press
ENTER. To clear all proximity waypoints, select Remove All,
and press ENTER.
4. Highlight OK, and press ENTER to confirm.
>
c
u
W
ode
reAtIng And
sIng
AyPoInts


Advertisement

Table of Contents
loading

Table of Contents