Garmin GPSMAP 276C Owner's Manual page 31

To edit the route on the map:
1. Highlight the Route tab on the Main Menu.
2. Select a route, and press ENTER. Press MENU to open the
Route Review Page options menu.
3. Highlight Edit on Map, and press ENTER.
4. Select a location on the route (the route turns red when the
arrow is over the route), and press ENTER.
5. Use the ROCKER to drag the route to the new point location,
and press ENTER.
Editing the route on the map
6. Repeat steps 4 through 5 until all points are added to the
route.
You can enter information about your trip so the GPSMAP 276C can
estimate information about your trip.
GPSMAP 276C Owner's Manual
M
ArIne
To plan your route:
1. Open the Route Review Page options menu.
2. Highlight Plan Route, and press ENTER.
Entering Speed and Fuel Flow for trip planning
3. Enter the data for Speed and Fuel Flow. You also can enter
the date and time of your departure. Press QUIT to return to
the Route Review Page.
NOTE: Fuel flow rates are measured in units per hour. System
setting changes for units of measure (statute, nautical, or metric)
do not affect the fuel flow measure. You should enter fuel
flow rates based on information for your vehicle (such as the
operator's manual or performance specifications), and make note
of the units of measure (gallons or liters).
M > c u r
ode reAtIng And sIng outes
2