Troubleshooting - DeLonghi ESAM 5600 Manual

TROUBLESHOOTING

Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact customer services.
PROBLEM
The coffee is not hot
The coffee is not creamy
enough
The coffee is delivered too
slowly or a drop at a time.
The coffee is delivered too
quickly.
POSSIBLE CAUSE
• The cups have not been
preheated.
• The infuser has cooled
down because 2/3 minutes
have elapsed since the last
coffee was made.
• The coffee is ground too
coarsely.
• Wrong type of coffee
• The coffee is ground too
finely.
• The coffee is ground too
coarsely.
24
REMEDY
• Warm the cups by rinsing
them with hot water (using
the hot water function).
• Before making coffee, heat
the infuser by pressing the
icon (see section
"Manual rinsing").
• Turn the grinding adjustment
knob one click anticlockwise
towards "1" while the coffee
mill is in operation (fig. 8).
Continue one click at a time
until coffee delivery is sati-
sfactory.
The effect is only visible after
making 2 coffees.
• Use a type of coffee for
espresso coffee makers.
• Turn the grinding adjust-
ment knob one click clock-
wise towards "7" while the
coffee mill is in operation
(fig. 8). Continue one click
at a time until coffee deli-
very is satisfactory.
effect is only visible after
making 2 coffees.
• Turn the grinding adjust-
ment knob one click anti-
clockwise towards "1" while
the coffee mill is in opera-
tion (fig. 8). Avoid turning
the grinding adjustment
knob excessively otherwise
when you select 2 cups, the
coffee may be delivered a
drop at a time.
The