Map Page Setup; Track Log Display - Garmin GPS 120XL Owner's Manual

REFERENCE

Map Page Setup

& Track Log
Display
On-screen range rings will
appear on the map when
the 'RINGS' option is set to
the 'Yes' position.
The screen resolution of the
track log may be changed
by increasing the number of
tracklog points displayed.
However, displaying too
many points may clutter
your screen .
52
Selecting Displayed Items on the Map Page (cont.)
• The 'NEAREST' selection will display the nine
nearest waypoints to your present position (not to
the target cursor on the map).
• The 'NAMES' selection will display the waypoint
name for the nine nearest waypoints.
To turn a plotted item on or off:
1. Highlight the confirmation (Yes or No) field for the plot-
ted item and press
U D
2. Use or

Track Log Display

The track log option sets the number of points the
unit will attempt to display on the Map Page. The
default setting of 250 points provides good resolution
with minimal screen clutter. The maximum setting is
768 points. Once the maximum number of track points
is reached, the older points will be lost as new points
are added. Note that adjusting the points displayed will
not affect whether or not the receiver records a track log
or the ability to create a TracBack route.
To enter a log setting:
1. Highlight to the 'track log' field and press
2. Enter a value in the 3-digit field and press
do not want to display a track, enter '000'.
F
.
to select 'Yes'/'No', and press
F
.
F
.
F
. If you