Map Setup And Orientation - Garmin GPS 120XL Owner's Manual

Magnetic Heading Reference (continued)
To select a heading reference:
1. Highlight the 'HEADING' field and press
2. Select the desired heading preference.
F
3. Press the
To enter a user-defined magnetic heading
. 1. Select the 'USER MAG' option and press
U
2. Use the and
and direction of magnetic variation.
F
3. Press the
variation value.

Map Setup and Orientation

The map setup page lets you select map orientation
and specify what items are displayed. The map may be
oriented to north up, the direction of current travel
(track up) or the direction of an active route leg
(desired track up). The default setting is track up.
To change the map orientation:
1. Highlight the 'ORIENTATION' field and press
U
2. Use the and
select the desired setting, and press
Selecting Displayed Items on the Map Page
The rest of the map setup page lets you specify
what items are displayed or plotted on the Map Page.
The first four plot items may be turned on or off by
selecting 'yes' or 'no' in the appropriate field:
• The 'RINGS' selection will display the three pre-
sent position range rings on the map.
• The 'ROUTE' selection will plot the straight leg
lines between waypoints of an active route and
display all route waypoint names.
key to confirm the selection.
D
keys to enter the degrees
key to confirm the magnetic
D
keys to toggle through and
F
F
.
:
F
.
F
.
.
REFERENCE
Magnetic
Heading & Map
Setup
To enter a user-defined
magnetic variation, select
the 'User Mag' option and
enter the desired direction
and value.
The 'North Up" orientation
causes the top-center of the
Map Page to represent
000º, the right-center to be
090º, the bottom-center
180º, and the left-center to
be 270º.
51