Marine/Mobile Electrical Wiring (Optional) - Garmin Personal Navigator GPS 100AVD Owner's Manual

· Verify that the external CDI is deflected half scale left (2.5 dots).
· Verifty that the TO/FROM FLAG on the CDI is in the TO position.
· Verify that the NAV FLAG on the CDI is out of view.
· Verifty that the MESSAGE ANNUNCIATOR(s) are illuminated.
· Verify the RMI indicates 315°.

14.5 MARINE/MOBILE ELECTRICAL WIRING (OPTIONAL)

The GPS 100 power/data cable allows you to connect the unit to vehicle
power systems, other marine electronics, and a remote alarm/beeper. The
harness will plug into the connector located at the left rear corner of the GPS
100.
To connect to vehicle power systems...
· Connect the RED harness lead (with fuse) to the positive (+) side of
a 12 or 24 volt DC power source.
· Connect the BLACK harness lead to the negative (-) side of the 12 or
24 volt DC power source.
You may also power your GPS 100 using a 12 or 24V automobile type
cigarette lighter by connecting a lighter adapter to the power/data cable.
14-4