Garmin Personal Navigator GPS 100AVD Owner's Manual page 103

· Press the ENT key when KFMY has been scanned into the reference
name field. The position of KFMY will be displayed on line 2 and the
cursor will move to "OK?" as illustrated below.
· With the cursor over "OK?", press the ENT key. The Mode Selection
Page will be displayed, as illustrated below, asking you to select the
operational mode.
Select the simulator mode...
· Use the left arrow key to move the cursor over the operational mode
field.
· Press the CLR key until the "SIMULATOR" option is selected as
illustrated below.
· Move the cursor over "OK?" and press the ENT key. You have just
selected SIMULATOR mode. The Database Page will be displayed as
illustrated below.
If the database information is acceptable, press the ENT key with the
•
cursor over "OK?". After approving the Database Page, the GPS
Status Page will appear as illustrated below and the GPS 100 will
sound its message tone and flash its Message Annunciator.
15-3