Using Waypoints - Garmin Personal Navigator GPS 100AVD Owner's Manual

4.3 USING WAYPOINTS

You may use waypoints on many GPS 100 pages. When a waypoint name
is entered, the Waypoint Definition Page will be displayed asking you to
confirm the position of the waypoint. For example, each time you enter a
waypoint into a route, the Waypoint Definition Page will be displayed.
To accept the waypoint definition...
· With the cursor over "OK?", press the ENT key.
To reject the waypoint definition...
· With the cursor over "OK?", press the CLR key.
Once a waypoint definition has been accepted or rejected, the previous page
will be displayed.
Some waypoints in the database may have the same name. When you have
entered a waypoint whose name is not unique, the Duplicate Waypoint Page
will be displayed for you to select the desired waypoint:
Index
The waypoint name and number of duplicates are displayed on the right side
of the page. Waypoint type and region of 3 duplicate waypoints are displayed
sorted by distance from present position. Additional waypoints are viewed
by scrolling through the list.
To scroll through the duplicate waypoints...
· Place the cursor over line 3 and press the right arrow key to scroll
down the list.
Waypoint Type
DUPLICATE WAYPOINT PAGE
Total Number
Region of Duplicates
Waypoint
Identifier
4-5