Table 114 802.1X Logs; Table 115 Acl Setting Notes - ZyXEL Communications P-660HN FxZ Series User Manual

Chapter 20 Logs
Table 113 Attack Logs (continued)
LOG MESSAGE
NetBIOS TCP
ip spoofing - no routing
entry [ TCP | UDP | IGMP
| ESP | GRE | OSPF ]
ip spoofing - no routing
entry ICMP (type:%d,
code:%d)
vulnerability ICMP
(type:%d, code:%d)
traceroute ICMP (type:%d,
code:%d)

Table 114 802.1X Logs

LOG MESSAGE
RADIUS accepts user.
RADIUS rejects user. Pls check
RADIUS Server.
User logout because of session
timeout expired.
User logout because of user
deassociation.
User logout because of no
authentication response from
user.
User logout because of idle
timeout expired.
User logout because of user
request.
No response from RADIUS. Pls
check RADIUS Server.
Use RADIUS to authenticate user. The RADIUS server is operating as the authentication
No Server to authenticate user.

Table 115 ACL Setting Notes

PACKET DIRECTION
(L to W)
(W to L)
(L to L/ZyXEL Device)
(W to W/ZyXEL
Device)
284
DESCRIPTION
The firewall detected a TCP NetBIOS attack.
The firewall classified a packet with no source routing entry as an
IP spoofing attack.
The firewall classified an ICMP packet with no source routing
entry as an IP spoofing attack.
The firewall detected an ICMP vulnerability attack.
The firewall detected an ICMP traceroute attack.
DESCRIPTION
A user was authenticated by the RADIUS Server.
A user was not authenticated by the RADIUS Server.
Please check the RADIUS Server.
The router logged out a user whose session expired.
The router logged out a user who ended the session.
The router logged out a user from which there was no
authentication response.
The router logged out a user whose idle timeout period
expired.
A user logged out.
There is no response message from the RADIUS server,
please check the RADIUS server.
server.
There is no authentication server to authenticate a user.
DIRECTION DESCRIPTION
LAN to WAN ACL set for packets traveling from the LAN to the WAN.
WAN to LAN ACL set for packets traveling from the WAN to the LAN.
LAN to LAN/ ACL set for packets traveling from the LAN to the LAN or
ZyXEL Device the ZyXEL Device.
WAN to WAN/ ACL set for packets traveling from the WAN to the WAN
ZyXEL Device or the ZyXEL Device.
P-660HN-FxZ Series User's Guide