Table of Contents
Advertisement
6.6 The 802.1x Screen
You can view and configure the 802.1X authentication settings in the 802.1x screen. Click
Network Setting > Broadband > 802.1x to display the following screen.
Figure 30 Network Setting > Broadband > 802.1x
The following table describes the labels in this screen.
Table 15 Network Setting > Network Setting > 802.1x
LABEL
#
Status
Interface
EAP Identity
EAP method
Bidirectional
Authentication
Certificate
Trusted CA
Modify
Chapter 6 Broadband
DESCRIPTION
This is the index number of the entry.
This field displays whether the authentication is active or not. A yellow bulb signifies that
this authentication is active. A gray bulb signifies that this authentication is not active.
This is the interface that uses the authentication. This displays N/A when there is no
interface assigned.
This shows the EAP identity of the authentication. This displays N/A when there is no EAP
identity assigned.
This shows the EAP method used in the authentication. This displays N/A when there is no
EAP method assigned.
This shows whether bidirectional authentication is allowed.
This shows the certificate used for this authentication. This displays N/A when there is no
certificate assigned.
This shows the Trusted CA used for this authentication. This displays N/A when there is no
Trusted CA assigned.
Click this icon to edit an item.
VMG1312-Bx0D User's Guide
80
Advertisement
Table of Contents
