Turn The Wireless Lan Off Or On; Activate Wps - ZyXEL Communications P-660HN FxZ Series User Manual

1.7.1 Turn the Wireless LAN Off or On

1 Make sure the POWER LED is on (not blinking).
2 Press the WPS WLAN ON/OFF button for less than five seconds and release it. The
WLAN/WPS LED should change from on to off or vice versa.

1.7.2 Activate WPS

1 Make sure the POWER LED is on (not blinking).
2 Press the WPS WLAN ON/OFF button for five to ten seconds and release it. Press the
WPS button on another WPS -enabled device within range of the ZyXEL Device. The
WLAN/WPS LED should flash while the ZyXEL Device sets up a WPS connection
with the wireless device.
You must activate WPS in the ZyXEL Device and in another wireless device
within two minutes of each other. See
information.
P-660HN-FxZ Series User's Guide
Chapter 1 Introducing the ZyXEL Device
Section 7.9.8 on page 129 for more
37