Clearing Jams In The Upper Door - Xerox Docucolor 2060 NPS/IPS Troubleshooting Manual

Clearing jams in the upper door

Troubleshooting Guide
7. Close tray 2.
8. Clear jams in the transport module. Refer to the section
"Clearing jams in the transport module" in this chapter.
9. Open tray 3.
10. Carefully remove all jammed paper.
11. Close tray 3.
12. Follow the instructions on the touch screen to resume your
print job.
Figure 4-4. Upper door
To clear a jam in the upper door:
1. Open the upper door above tray 1.
2. Lower the feed transport by pulling down on green handle 2.
3. Carefully remove all jammed paper.
4. Raise the feed transport back into its original position.
NOTE: The front door does not close if the feed transport
handle is not seated properly.
5. Close the upper door.
6. Follow the instructions on the touch screen to resume your
print job.
Clearing paper misfeeds and jams
4-5