Xerox Phaser 3428 User Manual page 17

System Setup menu
Use the System Setup menu to configure a variety of printer features.
Item
Language
Values: English, FRANCAIS, Espanol,
B. Portugues, Deutsch, Italiano,...
This setting determines the language of the text
that appears on the control panel display and
information printing.
Power Save
Values: [ 5] Min, [ 10 ] Min, [ 15 ] Min,
[ 30 ] Min, [ 60 ] Min, [ 120 ] Min
When the printer does not receive data for an
extended period of time, power consumption is
automatically lowered. You can set how long the
printer waits before going to power save mode.
Auto
Values: Off, On
Continue
This item determines whether or not the printer
continues printing when it detects the paper
unmatched to your paper setting.
• Off: If a paper mismatch occurs, the message
will remain on the display and the printer will
remain off-line until you insert the correct paper.
• On: If the paper is mismatched occurs, an error
message will display. The printer will go offline
for 30 seconds, then automatically clear the
message and continue printing.
Altitude Adj.
Values: Plain, High
You can optimize print quality according to your
altitude.
Auto CR
Values: LF, LF+CR
This item allows you to append the required
carriage return to each line feed.
Refer to the following samples:
AA
BB
CC
LF
Explanation
AA
BB
CC
LF+CR
Item
Job Timeout
Values: 0 ~ 1800 sec
You can set the length of time the printer waits
before printing the last page of a print job that
does not end with a command to print the page.
When a print time-out occurs, the printer prints the
page in the print buffer.
Toner Save
Values: Off, On
Selecting this item extends the life of your toner
cartridge and reduces your cost per page without
a significant reduction in print quality.
• Off: If you don't need to save toner when
printing a document, select this option.
• On: Select this item to allow the printer to use
less toner on each page.
Maintenance This item allows you to maintain your printer.
• Clean Drum
cartridge and produces a cleaning sheet with
toner debris on it.
•
Clean Fuser
printer and produces a cleaning sheet with
toner debris on it.
• CLR Empty MSG.: Prevents the Toner Low
Replace Toner message from appearing on the
display. Once you have selected On, this
setting will be permanently written to the
memory of the toner cartridge, and this menu
will be disappeared from the Maintenance
menu.
•
Supplies Life
many pages are printed and how much toner
are left in the cartridge.
Clear Setting This menu item allows you to restore the printer's
factory default settings.
2.4
<System setup>
Explanation
: Cleans the OPC drum of the
: Cleans the fuser unit inside of the
: This item allows you to check how