Table of Contents
Advertisement
Installation
3
Before you move or change components on the subscriber's entertainment system:
•
Review the installation instructions.
•
Determine if you are connecting to a standard analog NTSC TV (supporting an RF
input), a composite (baseband) video input, or an S-Video input) or a High-Definition
TV (supporting component video input, HDMI input, or an IEEE-1394 input).
•
Determine if the subscriber has other equipment to be connected to the terminal
(home theater or A/V receiver, VCR, etc.).
•
Verify that you have the necessary cables and other required items.
•
If the terminal was previously used, clear its hard drive before installing it at a new
subscriber location.
Cold Reset Procedure
This section describes the two Front Panel Cold Reset procedures for Motorola's
DCX3501-M set-top. The front panel cold reset is generally used by operational and field
personnel to accomplish the following:
•
Restore the set-top to a known state.
•
Clear channel maps, and application settings.
•
Remove application and software objects above the platform code.
•
Clear the Out of Band (OOB) Last Known Carrier (LKC) and force the units to hunt for
a new OOB control channel.
Front Panel Cold Reset Method 1
1. Remove the DCX from its packaging.
2. Applying AC power to the DCX.
3. Once 8888 appears on the front panel LED, simultaneously press and hold both the
power key and select keys on the front panel.
4. Once the key sequence has been executed correctly, the front panel LED will display
cold for one second and then the DCX will reset.
5. The front panel LED will display hunt until it finds an RF feed and/or a valid OOB
channel.
6. Once an RF feed or valid OOB channel is found, the DCX will lock to it, and the hunt
display will disappear.
High-Definition DVR DCX3501-M • Installation Manual
365-095-16528-x.2
B
Installation
10
Hide quick links:
Advertisement
Table of Contents
