Page 2
Note: Tighten compression nut #10 handtight plus 1 full turn. Torsión hasta ,6 - 1,7 N m Note: Serrez l'écrou #10 de compactage solide plus 1 plein tour. Nota: Apriete la tuerca #10 de la compresión handtight más 1vuelta completa. 200-2274...
Page 3
Screw, plastite #4-20 x 2” lg ...Vis........Tornillo *N/A - These are standard parts available at your local hardware store. *N/A - Ces pièces sont des pièces standard disponibles en quincaillerie. *N/A - Estas son piezas estándares disponibles en su ferretería local. 200-2274...
Page 4
PARTS DRAWING / DESSIN DES PIÈCES / ESQUEMA DE LA PIEZAS Note: Tighten compression nut #3A handtight plus 1 full turn. Note: Serrez l'écrou #3A de compactage solide plus 1 plein tour. Nota: Apriete la tuerca #3A de la compresión handtight más 1vuelta completa. 200-2274...
Page 5
Regulator-air line 1/4” NPT..Régulateur ......Regulador *N/A - These are standard parts available at your local hardware store. *N/A - Ces pièces sont des pièces standard disponibles en quincaillerie. *N/A - Estas son piezas estándares disponibles en su ferretería local. 200-2274...
Page 6
Serrez de 11 à 14 lbs-in Torsión hasta 1,2 - 1,6 N•m Torque to 50-65 lbs-in Serrez de 50 à 65 lbs-in Torsión hasta 5,6 - 7,3 N•m Torque to 75-88 lbs-in Serrez de 75 à 88 lbs-in Torsión hasta 8,5 - 9,9 N•m 200-2274...
Page 7
166-0118 1 Start capacitor cover....Couvercle......Tapa *N/A - These are standard parts available at your local hardware store. *N/A - Ces pièces sont des pièces standard disponibles en quincaillerie. *N/A - Estas son piezas estándares disponibles en su ferretería local. 200-2274...
PARTS AND SERVICE Replacement parts and service are available from your When needing service, please contact the nearest nearest authorized Service Center. If the need arises, authorized Service Center or call: contact Product Service as listed at right. When consulting with a Service Center or Product PRODUCT SERVICE Service, refer to the model number and serial number located on the serial label of the compressor.