Specifications - ADS P450.2 Owner's Manual

specifications

amplifier section
power output 4 (watts)1
power output 2 (watts)2
distortion all channels driven 0.1%
frequency response ±1dB
signal-to-noise ratio full
bandwidth @ rated output power
damping factor @ output
connector full bandwidth
input sensitivity
input impedance
recommended fuse type
P850.2
P650.2
P450.2
crossover section3
ch 1 & 2
ch 3 & 4
ch 5 & 6
ch 7 & 8
dimensions
P850.2
P650.2
P450.2
1. All channels driven, continuous FTC rated 4
power input voltage at 13.8DVC.
2. All channels driven, continuous FTC rated 2
power input voltage at 13.8DVC.
3. All channels are selectable with infinitely variable adjustments from 45Hz to 5,000Hz
with a slope rate of 12dB/octave and a "Q" of .707.
25
50/channel
150/bridged channel pair
75/channel
20Hz to 20,000Hz
10Hz to 30,000Hz
>90dB
>150
100mV to 8Vrms for full output
47 k
2 X 40 ATC
2 X 30 ATC
2 X 20 ATC
high-pass
high-pass & low-pass
high-pass & low-pass (P850.2), low-pass (P650.2)
low-pass
13" X 2" X 16 1/8" (330mm X 50mm X 410mm)
13" X 2" X 14 1/8" (330mm X 50mm X 359mm)
13" X 2" X 11 1/8" (330mm X 50mm X 283mm)
load, 20Hz to 20,000Hz, <0.1% THD,
load, 20Hz to 20,000Hz, <0.1% THD,