Internal Signal Routing - ADS P450.2 Owner's Manual

internal signal routing con't
Channels 5/6 input switch (P650.2 and P850.2) - selects input from three possibilities.
When the switch is in the left position, channels 5/6 receive input from a
summed input of channels 1, 2, 3, and 4 RCA input. Channel 5 receives the
summed input of channels 1 and 3. Channel 6 receives the summed input of
channels 2 and 4.
When the switch is in the center position, channels 5/6 receive input from
channels 1/2 RCA input.
When the switch is in the right position, channels 5/6 receive input from the
5/6 DIN/RCA inputs.
Channels 7/8 input switch (P850.2) - selects input from three possibilities.
When the switch is in the left position, channels 7/8 receive input from a
summed input of channels 1, 2, 3, and 4 RCA input. Channel 7 receives the
summed input of channels 1 and 3. Channel 8 receives the summed input of
channels 2 and 4.
When the switch is in the center position, channels 7/8 receive input from
channels 3/4 RCA input.
When the switch is in the right position, channels 7/8 receive input from the
7/8 DIN input.
Level controls - Independent level controls for channels 1/2, 3/4, 5/6 and 7/8
adjust the input sensitivity from 100 mV to 8 V RMS.
Output - Three-position switches determine the output configuration. Each stereo pair of channels can
be configured in either stereo, summed-bridged or bridged-mono.
When the switch is in the left position, the output channels are configured for a bridged-mono output
using a single RCA input. Ch 1 input is used for channels 1 & 2, ch 4 input is used for channels 3 & 4, ch
6 is used for channels 5 & 6 and ch 7 is used for channels 7 & 8.
When the switch is in the center position, the output channels are configured for summed bridged
operation by mixing the left and right input signals together.
When the switch is in the right position, the output channels are configured for stereo operation.
15
5/6
5/6