40
The rinse aid setting may
be too low, or the rinse aid
reservoir is empty.
Dishes were taken out too
soon.
Not enough rinse aid was
used.
The salt reservoir is
empty.
The salt reservoir cap was
not correctly screwed on.
The incorrect detergent
was used.
The rinse aid dosage is
set too high.
Increase the dosage or
refill the reservoir, see "Be-
fore using for the first
time".
Leave dishes in longer.
Increase the dosage, see
"Before using for the first
time".
Add reactivation salt, see
"Before using for the first
time".
Reseat it making sure it
screws back on correctly.
Only use powder deter-
gent or tablets.
Reduce the dosage, see
"Before using for the first
time".