38
Water intake error.
The "Drain" indicator
flashes.
Drain error. Water remains
in the wash cabinet.
The "Drain" indicator
flashes.
There may be a technical
fault.
The spray arm is hitting
an item in the basket.
Items are not secure in
the wash cabinet.
This may be caused by
the installation or the di-
ameter of the pipe.
– Turn off the dishwasher.
– Open the water valve.
– Clean the water inlet
filter, see maintenance
instructions.
– The water pressure is
less than 4.5 psi
(0.3 bar).
Contact a plumber.
– Turn off the dishwasher.
– Clean the triple filter.
See maintenance
instructions.
– Clean the drain pump
and the non-return
valve, see maintenance
instructions.
– Remove any kinks in
the drain hose.
– Turn the dishwasher off.
Despite the problem the
dishwasher can be used.
If the indicator lights flash
again after the next pro-
gram cycle, call the Miele
Technical Service Depart-
ment.
Interrupt the program and
rearrange items blocking
the spray arms.
Interrupt the program and
rearrange loose pieces.
This has no effect on the
dishwasher. If in doubt
contact a plumber.